By placing brush mats on strip roads at the harvesting site, logs can be harvested and extracted efficiently without causing any damage to soil or water. This also improves the work environment for the machine operators.
Gentle Effective Logging protects soil and water
It is vital that our harversting operation does not cause any damage to soil or water. Therefore we work with the Gentle Effective Logging-method. This helps us reduce soil damages and also to improve work efficiency.
The Gentle Effective Logging-method, in Swedish called SED-method, involves planning how the machines will drive, placing brush from the felled trees on the roads and building crossings over sterams and small waters courses.
Avoid difficult sections
Planning is a key element of the Gentle Effective Logging-method. By choosing the best routes for the roads on the site, we can avoid difficult sections and minimize the areas driven on by the forwarder. The harvester also hauls logs from areas with weak bearing capacity to areas with high bearing capacity, where the forwarder is working.
Another important point is that the harvester enters GPS coordinates in the machine’s computer, so that the forwarder receives clear track markings to show the route it should drive.
On slopes, mires or areas where turning around is not possible, the forwarder always reverses in. Then the driver can load the logs while driving towards firm ground. That means that the lightest load is distributed over the weakest soil, reducing the risk of soil damages or getting bogged down.
Brush mats protect the soil
Another key element of the method is to build appropriate crossings over streams and watercourses, and to place brush mats on the strip roads. We use also brush mats to strengthen weak sections on other parts of the site.
Clear information and good communication between the operastional planner, production supervisor and harvester and forwarder operators are also important. Everyone must be engaged and work together for the best results.
The Gentle Effective Logging method is used for both final felling and thinning, and has many benefits. In addition to avoiding wheel rutting, we can also harvest more sites at any time of year.
The method also makes harvesting more efficient. The machinery can cause less impact and work faster when brush mats are placed on the strip roads. Using brush mats on strip roads makes them smooth and sustainable, enabling more efficient driving. The brush mats also improve the work environment for the drivers, because driving is more comfortable.
By planning in advance, you can ensure that the logs are stacked in dry sections with high bearing capacity that the forwarder can reach without any problems.
The SED method focuses on five areas to avoid wheel rutting:
- Landing
Wheel rutting usually occurs close to the landing, where most of the logs are stacked. Landings should therefore be planned carefully, to ensure they have high bearing capacity. - Haul road
The haul road connects the landing with the entrance to the site’s main hoal road. The closest road with bearing capacity is always chosen as the hoal road. - Main hoal road
Most of the logs will be transported along the main hoal road. It proceeds from a landing or a hoal road and is always covered with brush mats. - Problem management
Dealing with problems, having clear information and good communication between all involved parties are important for both planning and felling on the site. - GPS log coordinates
The harvester operator uses the machine’s GPS logging to mark the type of strip road that will be made. The different colors of the GPS coordinates indicate what type of road it is, and show the forwarder operator where to drive.
How SCA applies the SED method
Brush mats on strip roads
Maps to show wet sections
Due to the wealth of information on the map in the harvester’s computer, the machine operator can see where there are wet sections in the area, for example, and avoid driving there.
GPS coordinates show the way
The harvester operator enters GPS coordinates in the machine’s computer, providing clear track marks for the forwarder and show how they should drive to avoid wheel rutting.
Planned driving
The harvester operator has felled some spruce trees close to the stream and stacked the logs further up to make it easier for the forwarder to reach them. That means that the forwarder will never have to drive on the sensitive area around the stream.
Appropriate crossings
A key element of the SED method is to build appropriate crossings over streams and watercourses. Careful planning is carried out here to determine the best method for building the watercourse crossing for the forwarder.
Log bridge
It is important to protect both the actual watercourse and the surrounding soil. Here, the harvesting team has built a bridge using logs and brush from the harvested trees.
Reaad more about
Planning before every harvest
In addition to long-term and landscape-level planning, we conduct careful planning ahead of every forest management action. The most extensive planning takes place prior to regeneration harvesting.
Clear-felling – an eternal ecocycle
Clear-felling forestry means that we manage the forest in a perpetual cycle, where new forest are being planted to grows when the mature one has been harvested. The cycle time is approximately 60 to 120 years.
Basic retention in every measure
Regardless of what measures we take in our forestry, we always take into account biodiversity, cultural environments, outdoor life and reindeer herding – we call it environmental consideration or basic retention. The most extensive consideration is taken during regeneration harvest.